Описание

  • Condition monitoring
  • Detection of objects with variable position
  • IO-Link 1.1
  • Red light line for perforated or stamped objects
The reflex sensor makes use of a red light line in accordance with the energetic principle and is suitable for detecting objects without any background. It’s suitable for reliable detection of objects with stamped or perforated surfaces such as PCBs and perforated sheet metal. Furthermore, objects can be detected on the light line regardless of position. The IO-Link interface can be used to configure the reflex sensor (PNP/NPN, NC/NO, switching distance), as well as for reading out switching statuses and distance values.
Range 100 mm
Switching Hysteresis < 10 %
Light Source Red Light (Line)
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Light Spot Diameter see Table 1
Electrical Data
Supply Voltage 10...30 V DC
Supply Voltage with IO-Link 18...30 V DC
Current Consumption (Ub = 24 V) < 20 mA
Switching Frequency 500 Hz
Switching frequency (speed mode) 750 Hz
Response Time 1 ms
Response time (speed mode) 0,67 ms
Temperature Drift < 5 %
Temperature Range -40...60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit and Overload Protection yes
Reverse Polarity Protection yes
Lockable yes
Interface IO-Link V1.1
Protection Class III
Mechanical Data
Setting Method Potentiometer
Housing Material Plastic
Degree of Protection IP67/IP68
Connection M8 ? 1, 4-pin
Optic Cover PMMA
Safety-relevant Data
MTTFd (EN ISO 13849-1) 1718,95 a
Output
PNP NO/NC antivalent yes
IO-Link yes
''