Описание

  • Condition monitoring
  • Dynamic readjustment of the switching threshold
  • High-end
  • IO-Link 1.1
  • Special for glass, PET and films
The retro-reflex sensor for clear glass recognition works with red light and a reflector. It has a IO-Link interface with a data storage function as well as additional configuration and diagnostic options. The interface can also be used to configure the sensors (PNP/NPN, NC/NO, switching distance, error output), as well as for reading out switching statuses and signal values. The dynamic readjustment of the switching threshold function automatically adjusts this for contamination, aging or temperature deviations, meaning that these factors have almost no effect on functionality.
Range 2000 mm
Reference Reflector/Reflector Foil RQ100BA
Clear Glass Recognition yes
Smallest Recognizable Part see Table 2
Switching Hysteresis < 5 %
Light Source Red Light
Polarization Filter yes
Service Life (T = +25 °C) 100000 h
Max. Ambient Light 10000 Lux
Light Spot Diameter see Table 1
Single-Lens Optic yes
Electrical Data
Supply Voltage 10...30 V DC
Supply Voltage with IO-Link 18...30 V DC
Current Consumption (Ub = 24 V) < 20 mA
Switching Frequency 1000 Hz
Switching frequency (speed mode) 2000 Hz
Response Time 0,5 ms
Response time (speed mode) 0,25 ms
Temperature Drift < 5 %
Temperature Range -40...60 °C
Switching Output Voltage Drop < 2 V
Switching Output/Switching Current 100 mA
Residual Current Switching Output < 50 µA
Short Circuit and Overload Protection yes
Reverse Polarity Protection yes
Lockable yes
Teach Mode NT, MT
Interface IO-Link V1.1
Data Storage yes
Protection Class III
Mechanical Data
Setting Method Teach-In
Housing Material Plastic
Degree of Protection IP67/IP68
Connection M8 ? 1, 4-pin
Optic Cover PMMA
Safety-relevant Data
MTTFd (EN ISO 13849-1) 2207,95 a
Output
IO-Link yes
PNP NO yes
''